Login

Register

Login

Register

Magna MG Series

Sale!

Magna MG Series

$25,000.00 $20,000.00

Battery Series Summary
The MAGNA MG Series DC System has been built to provide high quality with reliability power supply and battery charging capability. The MAGNA MG Series DC System is a thyristor-contrlled rectifier, suitable for charging nickel-cadmium or lead-acid batteries while supplying DC loads it can also be used without batteries as a direct power supply and backup power unit or auxiliary supply applications. The rectifier is built from independent building blocks and can be equipped with optional items such as distribution boards, diode droppers etc. built inside or in a separate cabinet. The cabinets are floor mounted and can be designed to meet specific environmental requirements. The batteries are mounted in free-standing racks or in cabinets together with or separated from the rectifier
DC Systems Technical
Boost and Float Charge Voltages are adjustable on the control panel. Charger output gives boost charging voltage by setting the timer to any value larger than zero. The Charger returns to floating voltage level when the timer value reaches zero. No settings are required if mains fails as these are saved to EEPROM. The input and output of the charger are protected against misuse and line disturbances electronically. Input and output can be switched by circuit breakers individually. It has self protection against over temperature. Alarm contact can be used for external system in the case of any abnormality. The output is fully isolated from the AC line input. The Charger has a modular design to provide service and maintenance Batbry simplicity. Outputs of the Battery Chargers can be connected in parallel or series in as per need.

Features

  • Input isolation transformer, isolated DC output with built-in
    earth fault detection
  • Standard system configurations
  • Heavy duty industrial design
  • Building block modular design
  • Built-in protection
  • Digital processing and setting of all parameters
  • Monitoring of all parameters via the front panel display
  • Built-in intelligent battery management
  • Temperature-compensated charge voltage regulation
  • Manual or automatic high rate charge
  • Parallel operation for redundancy and power increase
  • Alarm- and event logger, with a date and time-stamped event
    log memory
  • Large communication facility options
  • Inbuilt programable logic control to provide a wide range of
    interaction possibilities with external systems

Specifications

General Specifications
CoolingForced ( FAN Cooling )
Isolation Voltage 3750VAC between output and chassis
Efficiency>90 %
Operating Temperature0 – 40 ºC
Relative Humidity0% - 90% Non Condensing
Input/Output ConnectionsTerminals
Fuses / Circuit BreakersInput, Load and 3pcs double pole thermic magnetic circuit breakers
Display
LCD Display Panel Voltage, Current, Temperature, Charge and Status Informations
LED Display Panel Overload, Line, Battery, Load, LVD, Fault Indications
PHYSICAL SPECIFICATIONS
Dimensions(mm) (WxDxH)450x530x730 / 770x510x710
Standards
SafetyEN50091-1
EMCEN50091-2
PerformanceEN62040-3, EN 50091-3
Protection ClassIP 20( Other ratings available upon request)
Options
Dry Contact Card6pcs Contact alarms / Normally (closed/open)
LVDLow Voltage Disconnect ( Contactor )